Bluetooth
Get voipswitch+ALL ITS MODULES(VSC,VSR,PORTAL,SIPDIALER,TUNNEL)pc2phone/web2phone/callcentre/callshop/callback/calling card.....
BluetoothHi Friends,
VoIPSwitch is the Best Billing Solution for your VoIP Company. You can start your own CallingCard, CallCentre, CallShop, PC2Phone, Callback (Pin/DID/IVR/Web/SMS), Tunnel,, Device2Phone businesses under your company brand name.
APNAVOIP, Inc is the Best platform that allows implementing various types of Voice over the Internet Protocol (VOIP) services. No one can Challenge our services.
Some of the Common Advantages of our solution’s are as under:
General:
* Handling over 1,000 Concurrent Calls.
* No setup fee. Service setup takes just two hours
* Real-Time Traffic Control and Rerouting
RF modules|RF transceivers|wireless data modulesSRWF-1100A
BluetoothSRWF-1100A module is used to supply enable design for customers, the module does not take with MCU by itself , it only offer customers user interface for operation.
Condition:
Power Supply Work voltage of module is 1.8V-3.6V, recommending to use 2.8V. If the working voltage of MCU is higher than module`s, between each working port and MCU I/O port must be linked with resistance in series to separate them, and the range of supplying voltage between them is not too far. (recommending the same power supply to offer electricity)
RE/TE Control instruction:
RE/TE is used to control power of data receiving in expansion and transmission
RF modules|RF transceivers|wireless data modulesSRWF-1
BluetoothCondition: Technical specification of SRWF-1:
1. Transmit power is 10 mw.
2. Transmit distance is 300m.
3. Center frequency is 433MHZ/868MHz/915MHz.
4. We use GFSK/FSK Modulation mode, Interface format: 8N1/8E1/8o1 user-defined
5. We have three Interface mode : UART TTL / RS-232 / RS-485. The details of how to connect the interface you can read the user manual.
6. Interface baud rate is 1200/2400/4800/9600/19200bps, you can choose it as freedom.
7. Offering a transparent data interface, it is suitable for any standard or non-standard user protocols;
8.Transmitting current <40mA,Receiving current <20mA,Sleeping current <20uA
RF modules|RF transceivers|wireless data modules|cc1020 chip modules SRWF-505
BluetoothCondition: Technical specification of SRWF-505:
1. Transmission power is 20dbm (100mW)
2. Transmit distance is 1500m
3. Center frequency is 433MHZ/868MHz/915MHz.
4. We use GFSK/FSK Modulation mode, Interface format: 8N1/8E1/8o1 user-defined
5. We have three Interface mode : UART TTL / RS-232 / RS-485. The details of how to connect the interface you can read the user manual.
6. Interface baud rate is 1200/2400/4800/9600/19200bps, you can only choose one of it when you buy it.
7. Offering a transparent data interface, it is suitable for any standard or non-standard user protocols;
8.Transmitting current <190mA,Receiving current <32mA,Sleeping current <30uA
RF modules|RF transceivers|wireless data modules|cc1020 chip modules SRWF-507
BluetoothTechnical specification of SRWF-507:
1. Transmission power is 27dbm (500mW)
2. Transmit distance is 3000m.
3. Center frequency is 433MHZ/868MHz/915MHz.
4. We use GFSK/FSK Modulation mode, Interface format: 8N1/8E1/8o1 user-defined
5. We have three Interface mode : UART TTL / RS-232 / RS-485. The details of how to connect the interface you can read the user manual.
6. Interface baud rate is 1200/2400/4800/9600/19200bps, you can only choose one of it when you buy it.
7. Offering a transparent data interface, it is suitable for any standard or non-standard user protocols;
8. Even for semi duplex communication, the user doesn't need to prepare excessive programs, only receiving/transmitting the data from the interface. SRWF-507 will automatically, complete the other operations, such as transmission/receiving conversion in the air, control, etc.
RF modules|RF transceivers|wireless data modulesSRWF-1101
BluetoothTechnical specification of SRWF-1101:
1. Transmit power is 50mw.
2. Transmit distance is 150m in-building range, 700m in open ground.
3. Center frequency is 433MHZ / 315MHZ / 868MHZ.
4. We use GFSK/FSK Modulation mode, Interface format: 8N1/8E1/8o1 user-defined
5. We have three Interface mode : UART TTL / RS-232 / RS-485. You can choose only one of it when you buy it.
6. Interface baud rate is 1200/2400/4800/9600/19200bps, you can choose them as freedom.
7. Offering a transparent data interface, it is suitable for any standard or non-standard user protocols;
8.Transmitting current ≤80mA,Receiving current ≤20mA,Sleeping current ≤20uA
RF modules|RF transceivers|wireless data modulesSRWF-506
BluetoothCondition: Technical specification of SRWF-506:
1. Transmission power is 23dbm (200mW)
2. Transmit distance is 2000m
3. Center frequency is 433MHZ/868MHz/915MHz.
4. We use GFSK/FSK Modulation mode, Interface format: 8N1/8E1/8o1 user-defined
5. We have three Interface mode : UART TTL / RS-232 / RS-485. The details of how to connect the interface you can read the user manual.
6. Interface baud rate is 1200/2400/4800/9600/19200bps, you can only choose one of it when you buy it.
7. Offering a transparent data interface, it is suitable for any standard or non-standard user protocols;
8.Even for semi duplex communication, the user doesn't need to prepare excessive programs, only receiving/transmitting the data from the interface. SRWF-506 will automatically, complete the other operations, such as transmission/receiving conversion in the air, control, etc.
RF modules|RF transceivers|wireless data modulesSRWF-508
BluetoothTechnical specification of SRWF-508:
1 We use GFSK/FSK Modulation mode and use the high- efficiency forward error correction channel encoding technology so our modules have High anti- interference and low BER(Bit error Rate) feature.
2. Transmission power is 30dbm (1W)
3. Transmit distance is 4500m
4. We use GFSK/FSK Modulation mode, Interface format: 8N1/8E1/8o1 user-defined
5. We have three Interface mode : UART TTL / RS-232 / RS-485. The details of how to connect the interface you can read the user manual.
6. Interface baud rate is 1200/2400/4800/9600/19200bps, you can only choose one of it when you buy it.
RF modules|RF transceivers|wireless data modulesSRWF-501
BluetoothSRWF-501, the low-power wireless transceiver data module is used as the wireless data transceiver in short-ranges, with the small size, weight and power consumption and good stability and reliability. Narrowband low power UHF wireless data transmitters and receivers with channel spacings as low as 25 kHz:
it is mainly used as following show:
*orienting the steel wheel
*Queue management system
*intellectual over-weight detecting system
*home automation system
* AMR Automatic Meter Reading
* Wireless alarm and security systems
* 433 / 868 and 915 MHz ISM/SRD band systems
* Data radio can be used for Wireless conference voting system;


India